From GameBrew - a wiki dedicated to Video Game Homebrew.
A full access file browser for the 3DS console :godmode:
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, to the FAT partitions inside your SysNAND and EmuNAND and to basically anything else. Among other functionality (see below), you can copy, delete, rename files and create folders.
This is powerful stuff, it provides you with the means to do basically any thinkable modification to any system data available on the 3DS console. However, precautions are taken so you don't accidentally damage the data of your console. The write permissions system protects you by providing warnings and forces you to enter an unlock sequence for enabling write permissions. It is not possible to overwrite or modify any important stuff without such unlock sequences and it is not possible to accidentally unlock something.
As always, be smart, keep backups, just to be safe.
Quick start guide
The recommended bootloader for use with GodMode9 is fastboot3DS. There are known issues for some users when using the standard setup based on boot9strap and Luma3DS. If you insist on using that setup follow the instructions found in a certain guide. Here's how to set up GodMode9 (and fastboot3DS) up quickly:
- Download OpenFirmInstaller and follow the quick setup instructions found there.
- Copy the
gm9folder from the release archive to your SD card. Then, get good versions of
encTitleKeys.binfrom somewhere (don't ask me!) and put these two files into
sd:/gm9/support(optional but recommended for full functionality).
- It is also recommended you setup the RTC clock if you're running GodMode9 for the first time. Find the option via HOME button ->
More.... Also keep in mind that you should fix your system OS clock afterwards. While you're in the
More...menu, you may also set screen brightness to a fixed value of your choosing and manually calibrate the touch screen (not recommended - try the automatic configuration first).
- Helpful hint #1: Go here for step by steps on doing some common tasks in GodMode9. Especially users coming from Decrypt9WIP or Hourglass9 may find this to be helpful.
- Helpful hint #2: Never unlock the red write permission level unless you know exactly what you're doing. You will notice that prompt when it comes up, it features a completely red screen. It is recommended you stay on the yellow permission level or below at all times to be completely safe. Also read more on the write permissions system below.
You may now run GodMode9 via holding the X Button (or any other button you chose) at startup. See below for a list of stuff you can do with it.
Buttons in GodMode9
GodMode9 is designed to be intuitive, buttons leading to the results you'd expect. However, some stuff may not be obvious at first glance. So, here's a quick, incomplete rundown of what each button / button combo does.
- <A> button: The <A> button is the 'confirm' / 'choose' button. It confirms prompts and selects entries in menus. In the main file view, it pulls up a submenu for files and opens directories (use <R+A> on directories for a submenu, also including the invaluable title search). In the hexviewer, <A> switches into edit mode.
- <B> button: The <B> button is the 'cancel' / 'return' button. Use it to leave menus without action, hold it on file operations to cancel said file operations.
- <X> button: In the main file view, the <X> button deletes (marked) files. With <R+X> files are renamed.
- <Y> button: In the main file view, the <Y> button copies and pastes files. With <R+Y> you can create folders and dummy files.
- <L> button: The <L> button is the 'mark' button. Use it with <LEFT> / <RIGHT> to mark / unmark all files in a folder, hold it and use <UP> / <DOWN> to select multiple files.
- <R> button: The <R> button is the 'switch' button. It switches buttons to their secondary function. Notable exceptions are <R+L> for a screenshot (works almost anywhere), <R+LEFT> / <R+RIGHT> to switch panes and <R+DOWN> to reload the file listing.
- <START> button: Use the <START> button to reboot from GodMode9. Use <R+START> to poweroff your 3DS.
- <SELECT> button: The <SELECT> button clears or restores the clipboard (depending on if it's empty or not).
- <HOME> button: The <HOME> button enters the HOME menu, including the scripts / payloads submenus, options for formatting the SD, setting the RTC, and more. The <POWER> button is an alternative way of entering the HOME menu.
- <R+UP> combo: This little known keycombo, when held at startup, pauses the GodMode9 boot so that you can stare at the splash screen for a little longer.
- <R+LEFT> combo: If you have installed GodMode9 as your bootloader, this keycombo enters the bootmenu. Hold on startup! If you built GodMode9 as SALTMODE and have it as a bootloader, the keycombo is simply the <START> button.
How to build this / developer info
You may run
make release to get a nice, release-ready package of all required files. To build SafeMode9 (a bricksafe variant of GodMode9, with limited write permissions) instead of GodMode9, compile with
make FLAVOR=SafeMode9. To switch screens, compile with
make SWITCH_SCREENS=1. For additional customization, you may choose the internal font by replacing
font_default.pbm inside the
data directory. You may also hardcode the brightness via
make FIXED_BRIGHTNESS=x, whereas
x is a value between 0...15.
Further customization is possible by hardcoding
aeskeydb.bin (just put the file into the
data folder when compiling). All files put into the
data folder will turn up in the
V: drive, but keep in mind there's a hard 3MB limit for all files inside, including overhead. A standalone script runner is compiled by providing
autorun.gm9 (again, in the
data folder) and building with
make SCRIPT_RUNNER=1. There's more possibility for customization, read the Makefiles to learn more.
To build a .firm signed with SPI boot keys (for ntrboot and the like), run
make NTRBOOT=1. You may need to rename the output files if the ntrboot installer you use uses hardcoded filenames. Some features such as boot9 / boot11 access are not currently available from the ntrboot environment.
Same as boot9strap or fastboot3ds, GodMode9 can be installed to the system FIRM partition ('FIRM0'). When executed from a FIRM partition, GodMode9 will default to bootloader mode and try to boot, in order,
FIRM from FCRAM (see A9NC),
0:/bootonce.firm (will be deleted on a successful boot),
1:/boot.firm. In bootloader mode, hold R+LEFT on boot to enter the boot menu. Installing GodMode9 to a FIRM partition is only recommended for developers and will overwrite boot9strap or any other bootloader you have installed in there.
Write permissions system
GodMode9 provides a write permissions system, which will protect you from accidentally damaging your system, losing data and/or modifying important system data. To unlock a write permission, an unlock sequence must be entered. This is not possible by accident. The write permission system is based on colors and the top bar on the top screen will change color according to the current write permission level. No permission above the yellow level can be unlocked on SafeMode9.
- Green: Modification to system files is not possible on this permission level. You can't edit or delete savegames and installed data. However, keep in mind that any non-system related or custom stuff on your SD card is not protected.
- Yellow: You can modify system files on this permission level. Data that is unique to your console and cannot be gotten from anywhere else is still not modifiable. Any damages you introduce can be fixed in software, but loss of savegames and installed data is possible if you are not careful. A NAND backup is highly recommended starting at this level.
- Orange: This is similar to the yellow permission level, but, in addition, allows edits to console unique data. Any damages you introduce are still fixable in software, but if you play around with this, having a NAND backup is an absolute requirement.
- Red: The highest regular permission level. There are no limits to system file edits, and if you are not careful enough, you can brick your console and/or remove your A9LH/B9S installation. Bricks on this level may only be fixable in hardware. If you don't have a NAND backup at this point, you seem to have a deathwish for your console.
- Blue: This permission level is reserved for edits to system memory. While, most likely, nothing bad at all will happen, consequences of edits can be unforeseen. There is even a (albeit very small) chance of bricking your console, maybe even permanently. Tread with caution on this level.
For certain functionality, GodMode9 may need 'support files'. Support files should be placed into either
1:/gm9/support. Support files contain additional information that is required in decryption operations. A list of support files, and what they do, is found below. Please don't ask for support files - find them yourself.
aeskeydb.bin: This should contain 0x25keyX, 0x18keyX and 0x1BkeyX to enable decryption of 7x / Secure3 / Secure4 encrypted NCCH files, 0x11key95 / 0x11key96 for FIRM decrypt support and 0x11keyOTP / 0x11keyIVOTP for 'secret' sector 0x96 crypto support. Entrypoints other than boot9strap or fastboot3ds may require a aeskeydb.bin file. A known perfect
aeskeydb.bincan be found somewhere on the net, is exactly 1024 byte big and has an MD5 of A5B28945A7C051D7A0CD18AF0E580D1B. Have fun hunting!
seeddb.bin: This file is required to decrypt and mount seed encrypted NCCHs and CIAs if the seed in question is not installed to your NAND. Note that your seeddb.bin must also contain the seed for the specific game you need to decrypt.
decTitleKeys.bin: These files are optional and provide titlekeys, which are required to create updatable CIAs from NCCH / NCSD files. CIAs created without these files will still work, but won't be updatable from eShop.
Drives in GodMode9
GodMode9 provides access to system data via drives, a listing of what each drive contains and additional info follows below. Some of these drives are removable (such as drive
7:), some will only turn up if they are available (drive
8: and everything associated with EmuNAND, f.e.). Information on the 3DS console file system is also found on 3Dbrew.org.
0: SDCARD: The SD card currently inserted into the SD card slot. The
0:/Nintendo 3DSfolder contains software installs and extdata and is specially protected via the write permission system. The SD card can be unmounted from the root directory via the R+B buttons, otherwise the SD card is always available.
1: SYSNAND CTRNAND: The CTRNAND partition on SysNAND. This contains your 3DS console's operating system and system software installs. Data in here is protected by the write permissions system.
2: SYSNAND TWLN: The TWLN partition on SysNAND. This contains your 3DS console's TWL mode operating system and system software installs. Data in here is protected by the write permissions system.
3: SYSNAND TWLP: The TWLP partition on SysNAND. This contains photos taken while in TWL mode.
A: SYSNAND SD: This drive is used for special access to data on your SD card. It actually links to a subfolder inside
0:/Nintendo 3DSand contains software and extdata installed to SD from SysNAND. Crypto in this folder is handled only when accessed via the
A:drive (not from
0:). This is protected by the write permissions system.
S: SYSNAND VIRTUAL: This drive provides access to all partitions of the SysNAND, some of them critical for base system functionality. This is protected by the write permissions system, but, when unlocked, modifications can brick the system.
4: EMUNAND CTRNAND: Same as
1:, but handles the CTRNAND on EmuNAND. For multi EmuNAND setups, the currently active EmuNAND partition can be switched via the HOME menu.
5: EMUNAND TWLN: Same as
2, but handles TWLN on EmuNAND. No write protection here, cause this partition is never used on EmuNAND.
6: EMUNAND TWLP: Same as
3, but handles TWLP on EmuNAND.
B: EMUNAND SD: Same as
A:, but handles the
0:/Nintendo 3DSsubfolder associated with EmuNAND. In case of linked NANDs, this is identical with
A:. This is also protected by the write permissions system.
E: EMUNAND VIRTUAL: Same as
S:, but handles system partitions on EmuNAND. No bricking risk here as EmuNAND is never critical to system functionality.
7: FAT IMAGE / IMGNAND CTRNAND: This provides access to mounted FAT images. When a NAND image is mounted, it provides access to the mounted NAND image's CTRNAND.
8: BONUS DRIVE / IMGNAND TWLN: This provides access to the bonus drive on SysNAND. The bonus drive can be setup via the HOME menu on 3DS consoles that provide the space for it. When a NAND image is mounted, this provides access to the mounted NAND image's TWLN.
9: RAM DRIVE / IMGNAND TWLP: This provides access to the RAM drive. All data stored inside the RAM drive is temporary and will be wiped after a reboot. When a NAND image is mounted, this provides access to the mounted NAND image's TWLP.
I: IMGNAND VIRTUAL: When a NAND image is mounted, this provides access to the partitions inside the NAND image.
C: GAMECART: This is read-only and provides access to the game cartridge currently inserted into the cart slot. This can be used for dumps of CTR and TWL mode cartridges. Flash cards are supported only to a limited extent.
G: GAME IMAGE: CIA/NCSD/NCCH/EXEFS/ROMFS/FIRM images can be accessed via this drive when mounted. This is read-only.
K: AESKEYDB IMAGE: An
aeskeydb.binimage can be mounted and accessed via this drive. The drive shows all keys inside the aeskeydb.bin. This is read-only.
T: TICKET.DB IMAGE: Ticket database files can be mounted and accessed via this drive. This provides easy and quick access to all tickets inside the
ticket.db. This is read-only.
M: MEMORY VIRTUAL: This provides access to various memory regions. This is protected by a special write permission, and caution is advised when doing modifications inside this drive. This drive also gives access to
boot11.bin(boot9strap only) and
otp.mem(sighaxed systems only).
V: VRAM VIRTUAL: This drive resides in the first VRAM bank and contains files essential to GodMode9. The font (in PBM format), the splash logo (in PNG format) and the readme file are found there, as well as any file that is provided inside the
datafolder at build time. This is read-only.
Z: LAST SEARCH: After a search operation, search results are found inside this drive. The drive can be accessed at a later point to return to the former search results.
What you can do with GodMode9
With the possibilites GodMode9 provides, not everything may be obvious at first glance. In short, GodMode9 includes improved versions of basically everything that Decrypt9 has, and more. Any kind of dumps and injections are handled via standard copy operations and more specific operations are found inside the A button menu. The A button menu also works for batch operations when multiple files are selected. For your convenience a (incomplete!) list of what GodMode9 can do follows below.
- Manage files on all your data storages: You wouldn't have expected this, right? Included are all standard file operations such as copy, delete, rename files and create folders. Use the L button to mark multiple files and apply file operations to multiple files at once.
- Make screenshots: Press R+L anywhere. Screenshots are stored in PNG format.
- Use multiple panes: Press R+left|right. This enables you to stay in one location in the first pane and open another in the second pane.
- Search drives and folders: Just press R+A on the drive / folder you want to search.
- Compare and verify files: Press the A button on the first file, select
Calculate SHA-256. Do the same for the second file. If the two files are identical, you will get a message about them being identical. On the SDCARD drive (
0:) you can also write a SHA file, so you can check for any modifications at a later point.
- Hexview and hexedit any file: Press the A button on a file and select
Show in Hexeditor. A button again enables edit mode, hold the A button and press arrow buttons to edit bytes. You will get an additional confirmation prompt to take over changes. Take note that for certain files, write permissions can't be enabled.
- View text files in a text viewer: Press the A button on a file and select
Show in Textviewer(only shows up for actual text files). You can enable wordwrapped mode via R+Y, and navigate around the file via R+X and the dpad.
- Chainload FIRM payloads: Press the A button on a FIRM file, select
Boot FIRM. Keep in mind you should not run FIRMs from dubious sources and that the write permissions system is no longer in place after booting a payload.
- Chainload FIRM payloads from a neat menu: The
payloadsmenu is found inside the HOME button menu. It provides any FIRM found in
0:/gm9/payloadsfor quick chainloading.
- Inject a file to another file: Put exactly one file (the file to be injected from) into the clipboard (via the Y button). Press A on the file to be injected to. There will be an option to inject the first file into it.
- Run .gm9 scripts from anywhere on your SD card: You can run scripts in .gm9 format via the A button menu. .gm9 scripts use a shell-like language and can be edited in any text editor. For an overview of usable commands have a look into the sample scripts included in the release archive. Don't run scripts from untrusted sources.
- Run .gm9 scripts via a neat menu: Press the HOME button, select
Scripts.... Any script you put into
0:/gm9/scripts(subdirs included) will be found here. Scripts ran via this method won't have the confirmation at the beginning either.
SD card handling
- Format your SD card / setup an EmuNAND: Press the HOME button, select
SD format menu. This also allows to setup a RedNAND (single/multi) or GW type EmuNAND on your SD card. You will get a warning prompt and an unlock sequence before any operation starts.
- Handle multiple EmuNANDs: Press the HOME button, select
Switch EmuNANDto switch between EmuNANDs / RedNANDs. (Only available on multi EmuNAND / RedNAND systems.)
- Run it without an SD card / unmount the SD card: If no SD card is found, you will be offered to run without the SD card. You can also unmount and remount your SD card from the file system root at any point.
- Direct access to SD installed contents: Just take a look inside the
B:drives. On-the-fly-crypto is taken care for, you can access this the same as any other content.
- Set (and use) the RTC clock: For correct modification / creation dates in your file system, you need to setup the RTC clock first. Press the HOME Button and select
More...to find the option. Keep in mind that modifying the RTC clock means you should also fix system OS time afterwards.
Game file handling
- List titles installed on your system: Press R+A on a /title dir or a subdir below that. This will also work directly for
B:drives. This will list all titles installed in the selected location. Works best with the below two features.
- Build CIAs from NCCH / NCSD (.3DS) / TMD (installed contents): Press A on the file you want converted and the option will be shown. Installed contents are found (among others) in
A:/titles/(SD installed). Where applicable, you will also be able to generate legit CIAs. Note: this works also from a file search and title listing.
- Dump CXIs / NDS from TMD (installed contents): This works the same as building CIAs, but dumps decrypted CXIs or NDS rom dumps instead. Note: this works also from a file search and title listing.
- Decrypt, encrypt and verify NCCH / NCSD / CIA / BOSS / FIRM images: Options are found inside the A button menu. You will be able to decrypt/encrypt to the standard output directory or (where applicable) in place.
- Decrypt content downloaded from CDN / NUS: Press A on the file you want decrypted. For this to work, you need at least a TMD file (
decTitlekeys.binalso required, see Support files below) or a CETK file. Either keep the names provided by CDN / NUS, or rename the downloaded content to
(anything).cdnand the CETK to
- Batch mode for the above operations: Just select multiple files of the same type via the L button, then press the A button on one of the selected files.
- Access any file inside NCCH / NCSD / CIA / FIRM / NDS images: Just mount the file via the A button menu and browse to the file you want. For CDN / NUS content, prior decryption is required for full access.
- Rename your NCCH / NCSD / CIA / NDS / GBA files to proper names: Find this feature inside the A button menu. Proper names include title id, game name, product code and region.
- Trim NCCH / NCSD / NDS / FIRM / NAND images: This feature is found inside the A button menu. It allows you to trim excess data from supported file types. Warning: Excess data may not be empty, bonus drives are stored there for NAND images, NCSD card2 images store savedata there, for FIRMs parts of the A9LH exploit may be stored there.
- Dump 3DS / NDS / DSi type retail game cartridges: Insert the cartridge and take a look inside the
C:drive. You may also dump private headers from 3DS game cartridges. The
C:drive also gives you read/write access to the saves on the cartridges.
- Directly mount and access NAND dumps or standard FAT images: Just press the A button on these files to get the option. You can only mount NAND dumps from the same console.
- Restore NAND dumps while keeping your A9LH / sighax installation intact: Select
Restore SysNAND (safe)from inside the A button menu for NAND dumps.
- Restore / dump NAND partitions or even full NANDs: Just take a look into the
I:) drive. This is done the same as any other file operation.
- Transfer CTRNAND images between systems: Transfer the file located at
I:). On the receiving system, press A, select
CTRNAND Options..., then
Transfer to NAND.
- Embed an essential backup right into a NAND dump: This is available in the A button menu for NAND dumps. Essential backups contain NAND header,
SecureInfo_A, NAND CID and OTP. If your local SysNAND does not contain an embedded backup, you will be asked to do one at startup. To update the essential SysNAND backup at a later point in time, press A on
NAND image options...->
Update embedded backup.
- Install an AES key database to your NAND: For
aeskeydb.binfiles the option is found in
Install aeskeydb.bin. Only the recommended key database can be installed (see above). With an installed key database, it is possible to run the GodMode9 bootloader completely from NAND.
- Install FIRM files to your NAND: Found inside the A button menu for FIRM files, select
Install FIRM. Use this with caution - installing an incompatible FIRM file will lead to a brick. The FIRMs signature will automagically be replaced with a sighax signature to ensure compatibility.
- Actually use that extra NAND space: You can setup a bonus drive via the HOME menu, which will be available via drive letter
8:. (Only available on systems that have the extra space.)
- Fix certain problems on your NANDs: You can fix CMACs for a whole drive (works on
E:) via an entry in the R+A button menu, or even restore borked NAND headers back to a functional state (inside the A button menu of borked NANDs and available for
S:/nand_hdr.bin). Recommended only for advanced users!
System file handling
- Check and fix CMACs (for any file that has them): The option will turn up in the A button menu if it is available for a given file (f.e. system savegames,
ticket.db, etc...). This can also be done for multiple files at once if they are marked.
- Mount ticket.db files and dump tickets: Mount the file via the A button menu. Tickets are sorted into
eshop(stuff from eshop),
unknown(typically empty) and
hidden(hidden tickets, found via a deeper scan) categories. All tickets displayed are legit, fake tickets are ignored
- Inject any NCCH CXI file into Health & Safety: The option is found inside the A button menu for any NCCH CXI file. NCCH CXIs are found, f.e. inside of CIAs. Keep in mind there is a (system internal) size restriction on H&S injectable apps.
- Inject and dump GBA VC saves: Find the options to do this inside the A button menu for
S:drive. Keep in mind that you need to start the specific GBA game on your console before dumping / injecting the save.
- Dump a copy of boot9, boot11 & your OTP: This works on sighax, via boot9strap only. These files are found inside the
M:drive and can be copied from there to any other place.
Support file handling
seeddb.bin: Press the HOME button, select
Build support files.
encTitleKeys.bincan also be created / merged from tickets,
ticket.dband merged from other
encTitleKeys.binfiles via the A button menu.
- Build, mount, decrypt and encrypt
aeskeydb.bin: AES key databases can be merged from other
aeskeydb.binor build from legacy
slot??Key?.binfiles. Just select one or more files, press A on one of them and then select
Build aeskeydb.bin. Options for mounting, decrypting and encrypting are also found in the A button menu.
You may use this under the terms of the GNU General Public License GPL v2 or under the terms of any later revisions of the GPL. Refer to the provided
LICENSE.txt file for further information.
This tool would not have been possible without the help of numerous people. Thanks go to (in no particular order)...
- Archshift, for providing the base project infrastructure
- Normmatt, for sdmmc.c / sdmmc.h and gamecart code, and for being of great help on countless other occasions
- Cha(N), Kane49, and all other FatFS contributors for FatFS
- Wolfvak for ARM11 code, FIRM binary launcher, exception handlers, PCX code, Makefile and for help on countless other occasions
- SciresM for helping me figure out RomFS and for boot9strap
- SciresM, Myria, Normmatt, TuxSH and hedgeberg for figuring out sighax and giving us access to bootrom
- ihaveamac for first developing the simple CIA generation method and for being of great help in porting it
- wwylele and aspargas2 for documenting and implementing the DISA, DIFF, and BDRI formats
- dratini0 for savefile management, based on TWLSaveTool
- b1l1s for helping me figure out A9LH compatibility
- Gelex and AuroraWright for helping me figure out various things
- stuckpixel for the new 6x10 font and help on various things
- Al3x_10m for help with countless hours of testing and useful advice
- WinterMute for helping me with his vast knowledge on everything gamecart related
- profi200 for always useful advice and helpful hints on various things
- windows-server-2003 for the initial implementation of if-else-goto in .gm9 scripts
- Kazuma77 for pushing forward scripting, for testing and for always useful advice
- JaySea, YodaDaCoda, liomajor, Supster131, imanoob, Kasher_CS and countless others from freenode #Cakey and the GBAtemp forums for testing, feedback and helpful hints
- Shadowhand for being awesome and hosting my nightlies
- Plailect for putting his trust in my tools and recommending this in The Guide
- SirNapkin1334 for testing, bug reports and for hosting the official GodMode9 Discord channel
- Project Nayuki for qrcodegen
- Amazingmax fonts for the Amazdoom font
- The fine folks on freenode #Cakey
- All 3dbrew.org editors
- Everyone I possibly forgot, if you think you deserve to be mentioned, just contact me!
Time for a new GodMode9 release. The last major release, v1.9.0, was a pretty solid release to begin with, but as always there is room for improvement. This one focuses on bugfixes, fixing stuff that v1.9.0 did not do right. This is new:
- [new] On verification, offer fixing for badly decrypted NCCH/NCSD
- [improved] Much faster scrolling speeds in wordwrapped text view
- [improved] Largely improved method of GBA VC save injection (thanks @TurdPooCharger)
- [fixed] Fixed the .BPS code in scripting (thanks @Wolfvak)
- [fixed] Fixed a crash in the DISA/DIFF handling code (thanks @aspargas2)
- [fixed] Actually allow decrypting N3DS NATIVE_FIRM on O3DS
- [fixed] Last search drive is back again
- [fixed] Cart drive checking (don't show empty when it isn't
- [fixed] Notification light handling
Did you know? This marks the 40th release of GodMode9, with a whopping 1260 commits leading up to here. GodMode9 is now in it's fourth year of development and still going strong, thanks to all of my fellow developers, bug reporters and feature requesters.
We've been seeing a lot of bug reports these days with people telling us they can't convert their NCSD (".3DS") files to CIA in GodMode9. It can be assumed that all of them got their badly decrypted .3DS files from some shady source. Shady source: please at least provide proper decrypted files. @citra-emu: maybe stop supporting these files or at least give a warning to users? We, for our part, now properly detect these files and offer fixing. To use the new fixer, just verify your files.
As always this wouldn't have been possible without some help. Thanks go to @Wolfvak, @aspargas2 and @TurdPooCharger for actively contributing to development. I also thank everyone submitting bug reports and feature requests. A special mention goes to @HIDE810 who finally pointed out that text viewer scrolling is awfully slow in some cases and needs some work. Thanks, all of you!