| switchXBOXcontroller | |
|---|---|
 | |
| General | |
| Author | WerWolv98 |
| Type | Remote Play and Streaming |
| Version | 1.2 |
| License | GPL-3.0 |
| Last Updated | 2020/05/02 |
| Links | |
| Download | |
| Website | |
| Source | |
Turn your Nintendo Switch into an XBOX360 controller to play on your Windows computer.
User guide
Download the latest ScpDriverInterface release and use the ScpDriverInstaller.exe in there to install the Scp drivers.
Download the latest SwitchXBOXController release and execute SwitchXBOXController_Server.exe. You might have to allow network access in the firewall settings.
Put the SwitchXBOXController_Client.nro in your /switch/ folder on the SD Card of your Nintendo Switch.
Start the homebrew application using the hbmenu.
Screenshots
|
|
Changelog
v1.2 2019/05/02
- While the homebrew is running, the switch will be underclocked to 50MHz now.
- Added a IP selection for people that can't use UDP broadcasting.
v1.1 2018/11/03
- Fixed hard coded IP address in the homebrew application. Now uses UPD broadcasting to determent the computer's IP address.
v1.0 2018/11/03 Initial release.