NeXT Switch: Difference between revisions

NeXT
NeXT
General
Author	mistervampi
Type	Custom Firmwares
Version	3.05
License	GPL-2.0
Last Updated	2023/10/31
Links
	Download
	Website
	Source
	Support Author

Revision as of 04:29, 11 February 2024

The All-In-One Pack that will take your Switch to the NeXT Step. Based on ArgonNX, Hekate and Atmosphere with extra features.

Features

Main Bootmenu with adjustable settings.
Hekate (CTCaer).
Atmosphere (Vanilla).
Selected Homebrew Utilities for Final Users.
Best Sys-Modules (Tesla Ovl, Mission Control, Sys-con,Sys-FTP, others).
Tool to keep NeXT Up to Date without extract your SD Card.

Installation

Requirements

An Erista non-patched Nintendo Switch Console (not working on Mariko consoles)
PC with Windows 7/8/10.
USB-C Cable.
Jig or clip to Short 0-1 Pins of Right Joycon Rail.
Calm and patience.

How to use

Delete any internet connections saved on the Original Firmware (from System Settings > Internet > Internet Settings > Registered Networks) then Activate Airplane Mode.
Turn Off the console.
Download the most recent release, copy the content of SD Folder to the root of your SD card.
Insert jig/clip into the Right Joycon Rail.
Put your Switch into RCM Mode pressing POWER and VOL+ Buttons at the same time.
With TegraRCMGUI on PC, Rekado on Android Phones or any Dongle, Inject hekate_ctcaer_x.x.x payload file located in PC/PAYLOADS/ folder.
Tap on Hekate.
Important: Make a backup and create an emunand (very important).
Tap in Launch and then "Back to NeXT", then tap on Incognito.
With the Volume Keys go to "Incognito (EmuMMC)" and press POWER. Wait for the process to finish, verify that your Emunand serial was marked as XAW00000000000001 and then press POWER.
With the Volume Keys go to "Reboot to NeXT".
Now you can tap on Atmosphere to start Custom Firmware or Stock to back to Original Firmware.
Your can now connect to the internet in both systems.

For Android, Lakka or Ubuntu please put their respective payloads in the following paths: ANDROID > sd:/switchroot/android/coreboot.rom LAKKA > sd:/lakka/coreboot.rom UBUNTU > sd:/switchroot/ubuntu/coreboot.rom The Boot Menu will activate it's respective launcher button for those payloads that were detected.

User guide

Applications included (some are not included in the latest update, see changelog):

Hekate
Atmosphère
Switch Homebrew Loader
Switch Homebrew Menu
Sys-FTPD
EdiZon
|ldn_mitm
emuiibo
Incógnito RCM - Incognito_RCM has been modified to add "Reboot to NeXT" Option.
Lockpick RCM - Lockpick_RCM has been modified to add "Reboot to NeXT" Option.
NX-Shell
TegraExplorer - TegraExplorer has been modified to add "Reboot to NeXT" Option.
Linkalho
Mission Control
AIO Switch Updater
Amiigo
JKSV
NX-Shell
TinWoo
DBI Installer

Screenshots

Compatibility

Firmware from 10.0.x to 17.0.1.

Full compatibility with all soft/hard modded Switch consoles.

Changelog

v3.05 2023/10/31

UPDATED
- Atmosphere 1.6.2
- Sigmapatches
FYI: All most important patches/hombrew/sys-modules were tested before this public release in order to check compatibility and good functionality of this AIO with the latest system firmware available. But not in all cases the hombrew/sys-modules are updated by their devs at the time of each NeXT release. So keep in mind that by using some non-updated hombrew/sys-modules could cause freeze or crashes on system. Also, Nor me or homebrew devs takes responsability for any bricks or damages to your consoles by using this tools.

v3.04 2023/10/16

PARTIAL SUPPORT FOR 17.0.0
FULL COMPATIBILITY WITH ALL SOFT/HARD MODDED SWITCH CONSOLES
NO SIGPATCHES AVAILABLE YET
UPDATED
- Atmosphere 1.6.0 pre-release
- Hekate 6.7.0
- MissionControl 0.10.0
- TegraExplorer 4.1.1

v3.03 2023/08/29

Atmosphere 1.5.5
DBI
Tinwoo
FYI: All most important patches/hombrew/sys-modules were tested before this public release in order to check compatibility and good functionality of this AIO with the latest system firmware available. But not in all cases the hombrew/sys-modules are updated by their devs at the time of each NeXT release. So keep in mind that by using some non-updated hombrew/sys-modules could cause freeze or crashes on system. Also, Nor me or homebrew devs takes responsability for any bricks or damages to your consoles by using this tools.

v3.02 2023/07/08

UPDATED
- Atmosphere 1.5.4
- DBI
- Tinwoo
- L4T Android - Linux Bootloaders
FYI: All most important patches/hombrew/sys-modules were tested before this public release in order to check compatibility and good functionality of this AIO with the latest system firmware available. But not in all cases the hombrew/sys-modules are updated by their devs at the time of each NeXT release. So keep in mind that by using some non-updated hombrew/sys-modules could cause freeze or crashes on system. Also, Nor me or homebrew devs takes responsability for any bricks or damages to your consoles by using this tools.

v3.01 2023/05/15

HBMenu Override Button
AutoBOOT Atmosphere Button
Fix Emuiibo OVL Issue

v3.00 2023/05/11

Support 16.0.3.
Full compatibility with all soft/hard modded Switch consoles.
Updates:
- New Bootmenu based on Heakate
- Atmosphere => 1.5.3
- Sigpatches => 1.5.3
- Tesla OVL
- Emuiibo
- Lan Play
- AIO Switch Updater
- DBI
- Many major updates
- Package Ultra High Compression

FYI: All most important patches/hombrew/sys-modules were tested before this public release in order to check compatibility and good functionality of this AIO with the latest system firmware available. But not in all cases the hombrew/sys-modules are updated by their devs at the time of each NeXT release. So keep in mind that by using some non-updated hombrew/sys-modules could cause freeze or crashes on system. Also, Nor me or homebrew devs takes responsability for any bricks or damages to your consoles by using this tools.

v2.41 2023/03/15

In this release:
- Support for 16.0.0
- Next is getting partial compatibility with Mariko console.
- Now the First Boot Checker Payload (Thanks to Tegraexplorer and Hekate BDK) will detect your model and select a right bootmenu for it.
Updates:
- Atmosphere => 1.5.1
- Sigpatches => 1.5.1
- Package Ultra High Compression

External links

GitHub - https://github.com/mistervampi/NeXT
Twitter - https://twitter.com/vampitech?lang=en
Discord - https://discord.vampitech.net/

@@ Line 50: / Line 50: @@
 ==User guide==
 Applications included (some are not included in the latest update, [https://github.com/mistervampi/NeXT/releases see changelog]):
-*BootMenu by [[ArgonNX Switch|ArgonNX]]
 *[[Hekate - Nyx Switch|Hekate]]
 *[[Atmosphere Switch|Atmosphère]]
@@ Line 57: / Line 56: @@
 *[[Sys-ftpd Switch|Sys-FTPD]]
 *[[EdiZon Switch|EdiZon]]
-*[[Goldleaf Switch|Goldleaf]]
-*[[Awoo Installer Switch|Awoo Installer]]
 *[[ldn_mitm Switch||ldn_mitm]]
 *[[emuiibo Switch|emuiibo]]
 *[[Incognito RCM Switch|Incógnito RCM]] - Incognito_RCM has been modified to add "Reboot to NeXT" Option.
 *[[Lockpick RCM Switch|Lockpick RCM]] - Lockpick_RCM has been modified to add "Reboot to NeXT" Option.
-*[[NXMTP Switch|NXMTP]]
 *[[NX-Shell Switch|NX-Shell]]
-*[[SysDVR Switch|Sys-DVR]]
 *[[TegraExplorer Switch|TegraExplorer]] - TegraExplorer has been modified to add "Reboot to NeXT" Option.
 *[[Linkalho Switch|Linkalho]]
-*[[NightFall Switch|Nightfall]]
+*[[MissionControl_Switch|Mission Control]]
-*[[MissionControl Switch|Mission Control]]
 *[[AIO Switch Updater|AIO Switch Updater]]
+*[[Amiigo - Emuiibo GUI Switch|Amiigo]]
+*[[JKSV Switch|JKSV]]
+*[[NX-Shell Switch|NX-Shell]]
+*[[TinWoo Switch|TinWoo]]
+*[[DBI Switch|DBI Installer]]
 ==Screenshots==
@@ Line 77: / Line 76: @@
 ==Compatibility==
-Firmware from 10.0.x to 16.0.3.
+Firmware from 10.0.x to 17.0.1.
+Full compatibility with all soft/hard modded Switch consoles.
 ==Changelog==